SIM900

SIMCOM SIM900 GSM/GPRS Shield adalah shield yang kompatibel dengan Arduino berfungsi untuk menambahkan fitur GSM (voice call, SMS) dan GPRS.
Sangat cocok untuk aplikasi yang berhubungan dengan IoT, SMS gateway, remote controlling, smarthome, SMS/GPRS data logger, dan masih banyak aplikasi keren lainnya!

Fitur:
– Based on SIMCom’s SIM900 Module
– Quad-Band 850 / 900/ 1800 / 1900 MHz – would work on GSM networks in all countries across the world.
– Control via AT commands – Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
– Short Message Service – so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
– Embedded TCP/UDP stack – allows you to upload data to a web server.
– Speaker and Headphone jacks – so that you can send DTMF signals or play recording like an answering machine.
– Tokoduino dot com
– SIM Card holder and GSM Antenna – present onboard.
– 12 GPIOs, 2 PWMs and an ADC (all 2.8 volt logic) – to augment your Arduino.

Spesifikasi:
Power: via Arduino Vcc or DC Jack (5V to 12V, 1A PSU)
Quad-Band 850 / 900/ 1800 / 1900 MHz – would work on GSM networks in all countries across the world.
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2W @ 850 / 900 MHz)
Class 1 (1W @ 1800 / 1900MHz)
Selectable serial port.
Speaker and Headphone jacks
Low power consumption – 1.5mA(sleep mode)
Industrial Temperature Range -40 to +85
Size: 8,5 x 5,7 x 2cm (approx)

Note:
Shield ini wajib menggunakan adaptor tambahan agar bisa berfungsi, disarankan 9V minimal 1Amp.
Adaptor bisa dibeli terpisah dari lapak Tokoduino.

Kelengkapan:
1 set SIM900 GSM/GPRS Shield sudah termasuk dengan antenna externalnya.
Bonus SIM card adapter (untuk aneka macam ukuran SIM card)